Free Home Water Check now booking in Adelaide, Brisbane & the Gold Coast · takes 2 minutes
Add-ons

Your test decides. Not us.

Whole Home Water add-ons are extra stages fitted with your whole-home filter: a salt-free scale conditioner for hard water, a smart leak shut-off, UV for tank water and a PFAS-certified reverse osmosis upgrade. Your free water test shows which ones your home actually needs. Nothing is pre-ticked.

What your test result means

Each add-on has a trigger. If your results don’t show it, we don’t recommend it.

If your test showsWe recommend
Hardness above ~120 mg/L as CaCO₃, or visible scaleSalt-free scale conditioner
Every home (insurance and peace of mind)Smart leak shut-off + filter-life alerts
Tank or bore water used for drinkingUV steriliser for rainwater tanks
PFAS concern, or PFAS detected by lab panelPFAS-certified reverse osmosis upgrade

Each add-on is priced in your quote after your free water test. See how add-ons fit our whole-home systems.

Add-on questions

Which add-ons do I need?

Only the ones your free water test supports. Hardness above about 120 mg/L points to the scale conditioner; tank or bore water points to UV; a PFAS concern or lab result points to the certified RO upgrade. We recommend the leak shut-off for every home.

Are add-ons pre-selected in my proposal?

No. Your proposal marks add-ons your results support as recommended, with the reason, but you tick them yourself.

Are add-ons covered by the Care Plan?

Yes. Servicing for your add-ons is included in the first 12 months with every system. After that, any extra cost is shown as a fixed line in your quote before you accept.

Test first. Then decide.

Free 30-minute in-home water test. Add-ons are only recommended if your results call for them.

Book my free water test